There is a tech somewhere in brisbane that when he comes across a wpc 95 with a reset issue replaces the bridge, large caps and the voltage regulator. but he replaces the fixed 5 volt reg with a adjustable reg.
to do this he cuts tracks and drills holes in the pcb to accommodate the diferent pin configuration and trimpot and resistor for the reg. 

He does this because the machine still resets after he changes the large caps and bridge. I have said it a million times, just replace another 2 100uf 10 volt caps and it will work fine for another 10 years.

I have seen this on 3 boards and they have all come from the same seller.