does the slam tilt happen any time or when a certain target is hit?
could be a switch shorting to ground or a column or row wire shorting to something or a bad ground connection some where.
Is this the double ended soccer ball machine?
if it is and the boards are lying in the bottom of the cab make sure there is no foreign objects on the boards like a bit of metal or something like that (I haven't seen how the boards are mounted in this machine so i may be totally wrong).
The sound problem is more than likely a connector problem, reseat or replace the ribbon cable between the cpu and sound board (again i am not sure of the board configuration so i might be wrong again)
Andrew I haven't noticed any particular switch that makes it slam tilt I think its just random so I'll look for another tilt switch, I got the normal plumb one and coin door one but I would have thought there'd be one for player 2 up there end? Your right the boards are on the bottom letting all sorts of crap drop on them I need a air hose don't I to blast them clean but I'll look for any objects and remove them, there is a very long ribbon cable not sure where it goes but I'll check maybe to scores. The 3 switch's that don't work are close and on the same side but do have different color wires but I reckon if I can find the problem they will all probably work hopefully but today I'll have another close look and report back thanks all.
Peter
**UPDATE** turned game on today and sounds back including commentary played 2 games no worries but during 3rd game it reset or went to game over and attract mode??
