MORE GAMECODE AVAILABLE AT STERN for the PRO model.Original was 1.25 which was replaced by 1.4, but version 1.5 added today for PRO model.
Check the STERN site again for LE and PREMIUM models guys.
Note - easiest way to check for the gamecode version, is to look firstly at the "Read Me" file which shows the software version. Then, if its a higher number then your current version, then go to the download file and ofcouse copy.
1.5 is the latest file on the LE/Premium page as of tonight 3rd/May.
ALSO - I HAVE ADDED A QUICK GUIDE TO DO A GAMECODE UPDATE - VERY EASY1. remove backglass
2. switch dipswitch 8 to the on position on computer board (board without red led lights)
3. press and hold in white button for 4 seconds. button located on same computer board
4. open coindoor
5. place USB stick into USB slot on same computer board described above
5. press enter on coindoor buttons (far right button)
6. follow prompts on dot matrix
7. when dotmatrix tells u download is finished, remove USB stick
8. switch dipswitch number 8 back to off position
9. backglass gets put back on
10. turn machine off to reboot game, then u will see gamecode has been upgraded by viewing dotmatrix when u turn back onHope it helps.
