Author Topic: Williams / Bally ST TNG Restore  (Read 3234 times)

0 Members and 1 Guest are viewing this topic.

Offline Pinlinds

  • Trade Count: (0)
  • ***
  • Forum Posts:
  • Sydney
Re: Williams / Bally ST TNG Restore
« Reply #15 on: June 02, 2012, 01:45:29 PM »
Hi Nino
Here are two pics of the ST TNG lane guides from my machine.
The top one shows the left outlane and if you look carefully you can see where the lane guide has broken away and does not extend up to the screw post.
In the second picture I've taken the left and right guides out of the game. The top set is the right lane and the bottom set is from the left side. As you can see the very top row of plastic is the correct length (for the right side) it too has a tiny section broken off around the actual screw hole.
The very bottom row of plastic is the broken one from the left lane. So all on all other Sts I've seen this row is brushed steel.
I'd be happy to buy a complete set left and right or just get the brushed steel guides if can. So any help would be appreciated. Being a wide body it has different size and shape to most other WMS/Ballys.
Cheers
Lindsay