Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
The forum software has been updated!
Home
Help
Login
Register
The Aussie Pinball Arcade
»
Aussie Pinball Forums
»
Technical Matters
»
Handy hints and tips
»
Fitting 2 wires to a Molex crimp pin / contact
»
Message #116934
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Fitting 2 wires to a Molex crimp pin / contact (Read 2216 times)
0 Members and 1 Guest are viewing this topic.
beaky
Trade Count:
(
+7
)
Forum Posts:
Melbourne, Vic
Re: Fitting 2 wires to a Molex crimp pin / contact
«
on:
July 07, 2012, 01:26:17 PM »
once you have done this you will be able to fit it in the housing with room to spare
Logged
On site pinball repairs in MELBOURNE NTH SUBURBS : Circuit board repairs and refurbishing Australia wide (via Aust post)
Print
Pages: [
1
]
Go Up
« previous
next »
The Aussie Pinball Arcade
»
Aussie Pinball Forums
»
Technical Matters
»
Handy hints and tips
»
Fitting 2 wires to a Molex crimp pin / contact
»
Message #116934