Author Topic: Discharging a monitor  (Read 557 times)

0 Members and 6 Guests are viewing this topic.

Offline Boots

  • Trade Count: (+8)
  • ******
  • Forum Posts:
  • Adelaide
Re: Discharging a monitor
« on: August 19, 2012, 11:14:52 AM »
Discharging also requires a few go's,... don't believe it's discharged because you 'just did it'....the capacitance of the tube will partially restore a charge, so in effect, you might measure 20kv, then 10kv, then 2kv after each discharge-recovery........

Personally i keep a spare grounding plug (actually a scrapped EHT (aquadag) cap) permanently connected to avoid the residual recharges.

P.S. ELECTRICIANS know LESS than NOTHING about electronics hehehehehehe  ;-)

MM
+1

Also when you carry the tube around, just in case you still have some charge there keep the high voltage socket away from you guts - or ouch