I've decided to bite the bullet and install the post as it seems to drain way to easy. Wouldn't mind some advice as I've never done this before. There is a little cap looking thing covering the old hole under the clear coat I gues I just take this off and I should have a hole to insall the post?
Anything to look out for or be wary of ? How do the post's install? Where do I get one?
Thanks in advance.
Tim
Put the post In mate u won't regret it makes it a far better game to play,
And the legend Steve Ritchie can't be wrong
As far as installing you will have to confirm your statement,blank cap is UNDER the clear?
Maybe post a pic for clarification...
If caps been installed after clearcoat,
It's simply a matter of removing plug and screw in the correct post,
Very carefully with a washer to protect the clear coat from damage
I'm pretty sure the post is T nutted under,
will have a look at mine if u like So can track down the right one
Any of the Aussie suppliers should have one...
Peter
