The playfield is finally finished
This afternoon i straightened the top arch plastics and polished them up so they could be fitted. But first i made a couple of small mods... the first couple of pics show these.. originally all these plastics had was a single screw in the middle and one spacer to support them on either side of the PF. Thus when heated by the lamps this makes the plastics warp heaps worse!! So to help support them better i added extra pieces of wood in these areas to screw the plastics to. Hopefully they shouldn't be so prone to warping as much. I used cut off pieces of wooden guide rail from the spare Drac PF i had to make these.
Also i made the decals for the spinner.The backside art was still good enough to reproduce easy so i simply scanned, edited and printed this one. The front side was completely gone so i had to make this one from pictures od IPDB, drawing it onto paoer, same as i did for the kickout hole plastic.
Now this is finally done i'll start on the cabinet restoration, which i'll probably start a new thread for, rather than adding onto this one. Thanks heaps everyone for your compliments and support!!
Cheers... Mitch
