Author Topic: Another problem with RFM, This time graphics on monitor  (Read 1473 times)

0 Members and 7 Guests are viewing this topic.

Marty Machine

  • Guest
  • Trade Count: (0)
You might find it easier to fit them on the VGA pins on the board itself, a lot easier than surgery on your vga cable or getting inside the monitor itself....
For the short length of cable used it won't really matter that the 75ohm resistors are fitted on the cga-vga card. (on the VGA connector of course).
Otherwise, the other way would be to grab a small vga/dongle casing (as used on the CGA side of things), and fit the resistors in there.

Good luck, hope it all works out 100% and it should be a good fix to spread around to everyone who needs it ;-)