Have done quite a bit over the last little while, a few coats of spray putty, then sand back and check for areas i might have missed a small nick or scratch, refill, sand, spray etc.  Once it was good enough, i sprayed the edges in black - so when the decals are trimmed, there is black behind them.

Installed a new base in the main cabinet once i had sprayed all the inside black.

Then spent a lot of time cleaning all the cabinet hardware, spraying all the bolt heads black, getting rid of more gunk from everywhere.

Then put most of the stuff back in the headbox, and threw the decals on (wet method).

Also put the front decal on the main cabinet, but will need some assistance to put the side decals on.

A few shots of it starting to look like a decent machine....







Also tidied up things like the lockdown bar - sprayed with a chrome paint, and installed new warning and other stickers