Author Topic: Stern - Avengers Pinball (late 2012)  (Read 21407 times)

0 Members and 3 Guests are viewing this topic.

Offline Freiherr

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
  • The Oaks, NSW
  • Amongst clouds
Re: Re: Stern - Avengers Pinball (late 2012)
« Reply #780 on: March 26, 2013, 06:47:57 PM »
Is there the smaller aux driver board as well?  I know ACDCs had many issues with transistors shorting causing similar issues

There were no burnt Mosfets and it looks like my Avenger had a faulty coil. I hope this was not a bad batch of coils but in my case the coil failed due to overheating. Rod will come back with the part as the gate mechanism was locked by burnt plastic.
If you don't remember the 70s then you were on drugs.
If you remember playing pinball in the 70s you were having a good time.
If you don't remember anything,  then read about it here,