UPDATE ON CODE 1.65 - ISSUE ?

OK, I got a email back from Lyman in the USA, and I found the issue. Its NOT a software issue from Sterns end, its a hardware issue from my end.

So what I was asked to do, was check my dipswitch settings, incase, by accident, a dipswitch was turned on or off, by accident.

I checked my dipswitch settings, and ALL were in the right position. But after further advice, I turned the various dip switches on and off, but this time pressed down HARD to make sure the dipswitch was seated properly, and IT WORKED. Number 7 switch was the issue.
It drove me nuts there for a while, because it WAS in the right position.

So, if you have a ACDC machine, and for some reason u have any sort of software issue, check your dipswitch settings.

Lyman taught me something which WILL CONFIRM if your dipswitches are in the right positions and engaging properly.

When u turn your machine on, you should see Australia on the left side of the dot matrix display, this proves your dipswitches are correct.

BUT if u see five minus signs on the left side of the dot matrix on power up (- - - - - ) that means your dipswitch settings are NOT correct, and things like TOURNAMENT will not appear at all, the yellow button wont work or flash, and the game wont play right.

ALL Fixed, thankyou Lyman and Steve Ritchie for your help, and AMD-Michael, all very friendly and efficient. 

Brett