interesting bracket, assuming some of the new punched and pressed parts, maybe for the flipper ass. etc.

not to be picky but noticed some edges and holes have chamfers / fillets and others don't and the brace in the centre - does your guy that is designing have punch / press experience? Tricky business press work, shrink and and shear points etc. I would be inclined to round out the brace in the corner and have 2 thinner ones with a slight taper and not so vertical. Also design with all sharp edges and have the completed brackets chucked in a large rumbler to remove all sharp edges. Just trying to help as some press re-work can be an undesired cost.