While those guides bonded; It was time to work on the guide behind the drop targets. This guide is created in sheet metal with riveted brackets on the original machine. I opted to recreate this bracket in 1/8" clear acrylic. Why; Again... I feel the sheet metal block all the lite from the bulb under the plastic; preventing it from lighting up the playfield. I have a concern than the acrylic won't hold up long-term to the ball abuse; but short term I think the experiment is worth the benefit.  I layed out a new bracket in CAD and sent it to the laser cutter at techshop; then using the original as a guide; I used a heatgun and some clamps to bend the bracket into shape.








And checking the shape on the dummy PF:


Countersunk holes house the #6-32 counter sunk machine screws. Here's what it looks like; with it (sneak peak) plastics installed:


:Thumbs Up:
More tomorrow... time for bed.