Thanks to Mark for the files and link. Here is my attempt at improving the look of some spare coils I have. I did as suggested and put some masking tape on plain photocopy paper to give it that textured look. I reckon you can be texture photocopy paper but for now this is fine. I also stuck a layer of wide sticky tape over where the last bally logo would be printed and then laid the masking tape over I and the plan paper. I figured I could then peel that area of masking tape off the sticky tape and have an instant wrapper with adhesive on it.
Anyway here is the end result. The only issue I have is I used my inkjet as the laser is out of toner so it bled a little on the masking tape. You learn from stuff like this.
