Some buyers of these tables are operators and they have asked me to include a few things that it seems a lot of the others are leaving out (cost cutting I suppose?). The most requested thing is a solid door locking system. The usual single metal tab really isn't good enough and most know you can pop a door open in seconds with bare hands and even faster with a screwdriver.

The pics here show our initial prototype setup with a 2mm stainless lock tab and full three way door locking mechanism. We are using 4mm rod end bearings held in place with nylock nuts. There are some changes to this setup for the finished product - the lock screws on the right angle brackets are moved further towards the edge as I decided to use the flanged nut and it's a lot larger than a standard nut. Also the main tab that bolts to the lock in the middle is even stronger with webs in the corners.