Spent the day today preparing the cabinet for primer, paying particular attention to the following
1. Puttying cab to ensure its as flat as possible.
2. Filled the hole in front panel which was used as a credit button (non factory addition). Achieved this by cutting a 28mm circle piece on the cnc machine and glued it in. Let it set then bog to get it flat.
3. Fill the side rail screw holes with a skewer stick and glue
4. Sprayed primer - a high build spray putty to fill any imperfections, i want this cabinet to be straight as possible.
Cab will be sanded, and any final touchups made with a final prime if needed.
Pics attached, comments welcome.
