Author Topic: WILLIAMS INDIANA JONES Utilities Enter Button inside coin door not working  (Read 1140 times)

0 Members and 1 Guest are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Congrats on locating your machine. If you have the manual, check the last page for the Switch Matrix chart. You can download the manual from www.ipdb.org

The switches you should be looking at are the "Dedicated Grounded Switches". "Enter" is D* - so check the wiring on the CPU board at J205 Pin 9. Re insert the connector. Check to see if the Pin 9 Orange-Gray wire is loose from the IDC connector. Using a Multimeter, test continuity to the Coin Interface PCB J3, and then to the switch. Hopefully, you have no battery corrosion on the CPU board.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia