Author Topic: Sys 80 Non CPU boot/IRQ issue  (Read 2596 times)

0 Members and 4 Guests are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Sys 80 Non CPU boot/IRQ issue
« Reply #45 on: May 14, 2009, 12:26:30 AM »
If the tests are done correctly then it is a good chance that U2 or U3 is bad.  Also try it with the game prom removed. and test the IRQ then to ensure this is not dragging it down.

I will do this now and report back.  I think between me learning how the logic probe works and my nice new shiny DMM I believe I've done everything right as per Clay's guide. 

I've emailed Ed again - asking very very nicely if he has a QuickScan tucked away somewhere (shop listed sold out) of his QuickScan's....Just in case I get a HH or another Sys80 type game...Plus probably handy for someone locally to have one in case others get into trouble!



I was going to buy one just for that very reason. I have several system80s in the pipeline and I wanted to have a Quickscan handy for others that may run into problems in the future.

Let me know how you go - I might want one as well Marty.

Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia