Author Topic: Buck Rogers restore  (Read 1110 times)

0 Members and 1 Guest are viewing this topic.

Offline Mr Pinbologist

  • Trade Count: (+5)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Wauchope NSW
Re: Buck Rogers restore
« on: May 28, 2009, 09:45:38 PM »
After the playfield repairs were done it was then recovered with a new sheet of Mylar purchased from Bumper Action . It was then reassembled after cleaning all of the parts. The posts and all of the wire forms were cleaned with Nevr-Dull.

Some of the plastics were warped from the heat of the lamps so these were straightened by using the paint stripper gun to soften them, then clamping them between two sheets of smooth wood and letting them cool. After they cooled they were polished with Turtle Wax and installed. New rubber rings from Bumper Action were fitted. The yellow drop targets had been repaired many times so these were replaced. Yellow targets were not available so new white ones from Bumper Action were used instead. (BEING REPLACED WITH THE CORRECT TARGETS SOON!!)