Author Topic: TAF Mansion & Magnet Burn Overlays, Will pay for help(Gold Coast)  (Read 1182 times)

0 Members and 3 Guests are viewing this topic.

Offline Retropin

  • Trade Count: (+4)
  • ******
  • Forum Posts:
I found this image of the overlay from Mrpinball website. I havnt ordered it yet. I assume its just the colour of the backing behind the overlay.

What im wondering is if you have to cut out the playfield excactly. or do you just make the overlay a touch bigger than the area your covering then trim the overlay down?

Cheers

No thats the colour of the overlay - even if it was the colour of the backing then the green and white would be way out instead. Colour on this should be more lilac than purple. If its from Mr Pinball then it should be a licenced part, but this is way off spec.

Ive never inserted an overlay, but i have seen the results and have a PF here with an overlay. The idea is to cut out exactly what you intend to replace. My concern with this particular overlay is that if the colours are so far out then the sizing may well be also