Author Topic: Gottlieb High Hand  (Read 3799 times)

0 Members and 1 Guest are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Gottlieb High Hand
« on: November 23, 2008, 02:36:29 PM »
First tried the foam brush on a very bad space shuttle playfield, find the method good for larger areas and for planking.

The red will need 2 coats, like wise the maroon.  Yes you must sand between coats, I just use 800 wet and dry.  I would normally use spot putty to fill up the scratches and heavy wear areas first, but this particular playfield would of been too hard/not worth the effort.

The black copyright and signature can still be seen and will be traced by hand.  I don't like decals.



So you apply the paint to address the "planking" - but do you remove the excess with a rag ?
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia