OK- its all down hill from here.. Not faster just easier ! 

Head gets reunited with the cab. After 25 or so years of storage they finally meet again !

All hardware was pulled from the tumbler and installed onto the head and light board. The light board was also reunited with the headbox.

The light board, inside metal sheeting of the back box, display holders, globe sockets, wiring harness and board brackets were all thoroughly cleaned and installed.

I even put the hold down bolts in the tumbler ! 

The power driver board was rebuilt and the transformer was installed. I gave a quick coat to the transformer cover.

All displays were tested and repaired if needed and installed. All boards were rebuilt and installed.