Bit of an update....

Waiting for some components & other bits before I can get back onto the display..

Stripped probably about 1/2 the pf.  Unfortunately two of the r/h/s sling posts snapped in the t-nut straight away      Hopefully I will be able to just gently tap the t-nut out and replace both....

Bumpers removed (not fun) and a couple of touch ups to be done.  This is the only wear on the whole playfield.  It seems that it was factory mylar down below, but nothing around the bumpers at all?  Given the little wear, it was either very well looked after or low play...I will touch up as best as I can and probably mylar the bumper section.  I will keep the mylar only on the red section which should hide it nicely.

**It makes me laugh that the graphic designers actually painted the turtles bum hole on too!**