Hi There,
If everthing looks fine with the fuse and wiring then try getting a wire and briefly shorting the metal tip of Q42 (on the driver board) to ground (one of the board mounting screws will do), if the flashers come on then more than likely you have a dodgy transistor (TIP102), if not then you have a wiring problem, maybe the power wire that runs to the flashers has come off somewhere, good luck
Had heaps on, and finally got to this thread. Thank you for the advise and will give it a try tomorrow (Friday). Will report on findings. The hotdog has been dead for all this time but been doing decals, mods, help at Mark's, spending cash etc etc . Sorry for the very very slow repsonse but much appreciated
