So what more will the purchaser need to do? Nothing if they dont want to, plug in and play!!

But if it were a keeper, for me I would:

*The playfield has some corrosion on metal components both on top of the playfield and under.  If I had time and were keeping the machine I would purchase some metal components for top of playfield.  Such as ball gates and screws that hold posts down etc.  All readily available.
*Under playfield could do with some compnents being removed and having NINOs ranex treatment.  All work but rust is on some items.
*Coin door internals need ranex and sanding/buffing.
*One playfield plastic (top right hand ball arch) is missing.  I have a scan (thanx FIREPOWER - David) and will print, laminate and cut to size as a temp.  These plastics do come up on eBay etc.  So the buyer just needs to keep a keen eye out.
*Backglass is very average 5/10.  Im sure there must be one hanging in someones games room that they want to sell??  Anyway, buyer would want to keep an eye out for one if it comes along.
*The apron is rusty, needs sanding back, spray paining and decal installed.

Thats it...

Will post some more pictures this arvo...although I only have an 1-2 hours to work on it today.

Dean