Author Topic: Centaur II Maybe I should hold onto it  (Read 3216 times)

0 Members and 15 Guests are viewing this topic.

Offline shansta

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Vic...
  • I want to migrate... To Qld...
Re: Centaur II will be on its way soon..
« Reply #45 on: September 13, 2009, 12:27:11 AM »
Sorry Wotto...

The right hand slingshot does not go all the way home as per the photo - it does sometimes... This is because the whole thing is loose under the playfield!

Both are piss weak and need help/coils!

The plastics are complete - except missing small rectangle plastic/lane guide that sits at the back of the RH flipper.

The LH slingshot plastic has had an extra hole drilled in it and is not mounted correctly.

The RH slingshot plastic is warped from being incorrectly fitted.

The white plastic lane guides are both different...

Target faces worn out - 2 targets have been changed with thinner non-original ones.

Surface has a few minor wear spots under the mylar. Bigger wear spot at the bottom of the outlane.

Backglass has a leopard-skin effect because it was in a room with a clothes dryer. Bit of flake RHS halfway up.

Can't look at the boards as the backbox key is not the right one...

Took some quick and dirty phone pictures.

Why is it called PMS?
Because "Mad Cow Disease" was already taken...