Author Topic: Centaur II Maybe I should hold onto it  (Read 3296 times)

0 Members and 1 Guest are viewing this topic.

Offline Wotto

  • Trade Count: (+1)
  • ******
  • Forum Posts:
  • NSW Australia
Re: Centaur II will be on its way soon..
« Reply #45 on: September 13, 2009, 12:32:58 AM »
Sorry Wotto...

The right hand slingshot does not go all the way home as per the photo - it does sometimes... This is because the whole thing is loose under the playfield!

Both are piss weak and need help/coils! - No biggie I guess

The plastics are complete - except missing small rectangle plastic/lane guide that sits at the back of the RH flipper.

The LH slingshot plastic has had an extra hole drilled in it and is not mounted correctly - dickheads

The RH slingshot plastic is warped from being incorrectly fitted.-  again - no biggie
The white plastic lane guides are both different...

Target faces worn out - 2 targets have been changed with thinner non-original ones.- easy fix

Surface has a few minor wear spots under the mylar. Bigger wear spot at the bottom of the outlane.

Backglass has a leopard-skin effect because it was in a room with a clothes dryer. Bit of flake RHS halfway up- YEWOUCH !!- Leopard pattern is BAD news

Can't look at the boards as the backbox key is not the right one... break it open :lol  :lol

Took some quick and dirty phone pictures.


DW Drums rule !