Message #44351

[beaky]

interesting
but i will be using a press to do mine

The die kit cost me $55 and the press $100

The die kit included the dies + all the parts you need and instructions to convert a standard half or 1 ton arbour press into a precision  rivet press
I just need to do the simple mods to the press so it will take the dies.

if you want to buy the head and roll over die they will cost you $18.50 us each + postage
if you want the kit its worth $55 us + plus postage
this is the link http://www.pinrestore.com/Riveting.html
just scroll down till you find what you want

you can buy the press in australia for $99 and there is a shop in most capital cities ( you can buy it from pinrestore but the shipping cost would be quite high because of the weight
here is the aussie linkhttps://www.machineryhouse.com.au/Products?stockCode=P118

if you just want to buy the rollover and head die then buy the rest of the parts from australia just pm me and i can email you the instructions and parts list to make this press.