Author Topic: Funhouse Restoration  (Read 8333 times)

0 Members and 7 Guests are viewing this topic.

Offline MartyJ

  • Trade Count: (+4)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Melbourne
Re: Funhouse Restoration
« on: October 11, 2009, 05:12:01 PM »
Basically at this stage, I'll be concentrating on cleaning every screw, post, nut for the short term.  Rudi will need to be rebuilt (as they all do).
I will also rebuild all 4 flipper assemblies, slings, kickers etc...Ramps - steps on is VGC the other has broken at entrance so I'll probably see if either RTBB or PSP has one.

I don't think its been ever stripped.  Everything seems 100% original and thankfully no hacks that I can see on playfield loom.

I'll tackle the boards in between as well.

When dismantling - the only problem I struck was the divertor assembly.  The allen key nut had rusted and when I tried to undo just stripped the inside.  I had to cut it with the dremmel but they are available so I can replace.