Author Topic: Creature Prototype Restoration  (Read 9528 times)

0 Members and 4 Guests are viewing this topic.

Offline johnwartjr

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Columbus, Indiana USA
  • It's ALIVEEEEEE!
    • My Home Gameroom . com
Re: Creature Prototype Restoration
« Reply #60 on: November 19, 2009, 06:04:55 PM »
So, a little more progress was made on Day #20

Link to big pics, if you are so inclined.. album now has 323 pics...

http://gallery.myhomegameroom.com/gallery/proto_cftbl_progress/DSC_2332

Sent a reproduction of the cabinet info sheet with lamp and switch matrix over to the local print shop and had them run me off a couple on legal sized paper with lamination. This is always a nice touch - more for looks than anything, as once installed, it's not very useful :)



Installed the chart



Upgraded the slide hardware to the 'later' style, which works a lot better



Installed the coin door and lockdown receiver




Next steps are to rebuild the projector and install it, find a replacement cabinet speaker (got to check the parts bin... or upgrade) and rebuild and install the mirror assy. Also need to finish up the refurb of the transformer, which is going to be time-consuming.

Once that is done, I'll start on the head.