CABINET STENCILLING;

I’ve been taking my time doing this, been working on it for the last two weeks in my spare time after work and on weekends, I just got the 2nd side finished this morning after spraying on the blue on the 2nd side yesterday.

I used the same process as used on the backbox… clear contact, trace the stenciled art onto the contact etc etc. this time as I said I took my time, allowing each colour to dry for about 24 hours before doing the next. I did one side at a time… spraying on the red, letting it dry then masking off the red and then cutting out the sections of contact for the blue and spraying the blue on. I sprayed on some of the base colour white to help seal the edges before spraying on the red and blue.

Here is the left side being done. Notice that after spraying the red, I cut and removed the contact for the red parts... The reason I did this was to check that everything was ok before doing the next colour… something that I didn’t do when doing the right side. A small amount of paint underspray got under the contact in a couple of spots where the contact lifted a bit.. not a big deal really as it was easily fixed, more on that later.