Well spent a few hours this afternoon on the old beasty.   At this stage its just a mecahnical rebuild to make sure i can get it going once its running ill strip it down again for a good scrub up.   This afternoon i removed all the internals of the cabinet and rebuilt all the stepper units, cleaned and adjusted all the relays and cleaned and adjusted all the switches.   Each relay ans stepper switch was tested one at a time with a multi meter to make sure they were all working propery as once its back in the game these wont be accesible.

 I also repaired the rodent damaged wires

First photo is the internal board.

Second and third are what i have to tackel next  EEEEW   if an Em pinball worries you this will give you nightmares