Author Topic: My second pin has arrived - Pro football  (Read 18081 times)

0 Members and 2 Guests are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: My second pin has arrived - Pro footballer
« on: December 28, 2008, 05:59:20 PM »

Rob,

The lose wire is for the "coil lock out" coil. It should not be floating around as it will short and cause all sorts of weird issues. For now - either solder it back on to the coil (test the coil is not a dead short), or use some electrical tape to cover the wire.

Second issue is the burnt out coil. That would be for the "10,000" score reel - or the score reel to the LHS ? That is most likely burnt out because there was a playfield switch stuck permanently "on", or the 10,000 unit did not dis engage. I do have a schematic and access to my dis assembled Pro Football machine. I guess we need a coil first up ?

I'll have a look for my schematics...

BTW - the score reel is not missing the board - not all the score assemblies have the board !

Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia