A small update.

I did a test print at Hamishs place on A3 paper and taped them together:



Overlayed it on the playfield and found it was a bit short. So my measurement were off 



Since that shot I have changed a bit of the art. I will update that soon.

I also had a go at the backglass:





I think I will call it RACE? and have RPM on the inserts. Thoughts?

Over the weekend I sanded the art off the playfield, removed all the inserts because I am going to make some new ones, sanded the  bottom apron and the metal apron thing at the top. Also the cover over the shooter, the side rails and prepped the head box. I only have the actual cabinet to prep then spray some paint on everything. Oh and the pops will get some paint too.

Man, so much to do, so little time to do it :(