Lookn good Nino  Im pretty sure that for an EM chime assembly the coils should be A-5195, which are a little bit more powerful coil than the SS ones fitted to your chime unit. So if you find that the chime unit sounds a bit weak, maybe change to the coils to A-5195 coils. 

Top notch work as always

100% correct Mitch - We are going to see how we go with this chime unit. It was all that was available at the time 

Coin Door


The coin door has had some parts removed - notably the lock out coil and some wiring. It looks to be in good shape.








Same Ranex, Windex, scotchbrites and tumbling time was spent on the door. I regrained with 320 Grit Wet/Dry and windex. Very happy with the results ;








More spares have been ordered from PBR and should be on their way. The door will be completed then.


The coil sleeves were installed in all the drop target coils, and a couple of lamp sockets were replaced as well. I didn't like the Bumper assemblies (yokes and springs) - so I replaced them. There is the underside 99% done ;





Here is what lies ahead of me !





ALL the score reel assemblies will be individually cleaned and even the coil sleeves replaced. That will be in the next installment !