Like i said a lot of cleaning, polishing and waxing...
Every mech, including the swinging target and two drop target banks, was pulled apart and rebuilt. All metal was polished and every single coil sleeve was changed.
All 3 pop bumper assemblies were replaced with brand new complete assemblies...Everything was attached to the bracket, easiest rebuild ever.... Unsolder the light sockets, undo four screws and reverse the procedure and they were done...20 minutes max... Best ever !
I also gaped and cleaned every switch.
Flippers were rebuilt and the left coil was replaced. I also had a couple of brackets that had fatigued over the years of abuse so i located new replacements from my friend Gregory...RTBB... and replaced them. The wiring loom got a tidy up and clean. Plastics were in great shape as to were the posts so they got a good cleaning too.
A few pics is of the PF with 3 coats of wax. The rest are of rebuilt mechs etc.
