Thanks for the kind words guys...
Some more work on the STTNG...
The flipper mechs were rebuilt, new flipper kits plus new coils were installed. These have been put aside ready to install back onto the pf.
Stripped and rebuilt pop bumper assemblies. All new parts have been added including the metal rings..
Seeing as 2 out of 3 of the metal yokes were broken I chose to go with the heavier duty Gottlieb metal yokes. They are a lot more robust. I did not want to get back in there to do it again!
All the under side of the inserts were cleaned with Windex and a cotton bud. To me this makes a huge difference and is done on all my machines. For the 2 minutes extra work it sure is worth it.
I used the TC polishing kit on the pf. I was quite content with the outcome but nothing a hand job couldn't do!
I also re globed all inserts and GI through out the pf not including the light boards.
There was three switches that were shot, middle rollover and the left and right outlanes. I replaced all 3 with new ones.
It is only just now starting to show its potential!
last pic shows the cleaned inserts....
