Hey guys,

I've been flat out the past few weeks getting things set up regarding Pinball Tales. I have been getting to know some of the new air tooling, and i will be introducing the next stand-alone service later this week as a result. My T2 playfield was the crash test dummy (so to speak), but preparation is key...and it certainly paid off this time 
I will be getting back to all of my clients over the next week who have contacted me regarding playfield work (you know who you are  )

Thanks again for all the kind words on the T2 restoration guys- its slowly getting there  .

Anyway - here are my latest results. Once i had applied the new insert decals, a VERY thin clear was applied and left to cure over a few days. From here, i blocked back the coat and began to level out the playfield. The clear has now built up really nice. The photos show the result straight off the gun. A cut and polish should really get the playfield looking perfectly level.

Instead of posting lots of different angles, i thought a video clip could be cool as well. At least you can see some shiny movement 

ONE snap...


ONE Video - (the quality will improve once youtube processes it)


Hope you had a good weekend guys -

Timbo