According to the manual;
FL-11629 for the lower coils
FL-11630 for the upper
Make sure the EOS is gapped, and that they move freely without resistance (do this with the machine off)
Also - Is your machine set at 6.5 Degrees ?
That is what is installed in my machine and I have no problems at all.
I was looking through my manual the other night checking all coils are correct (as I have started rebuilding it) and noticed my manual has a FL-11629 for the upper and lower right flippers and a FL-15411 for the lower left flipper. Maybe my manual is older
I think I'll leave it as I have never had a drama but wonder which is correct?
