Thanks nino.

Starting to get all the parts together to rebuild the rectifier board, got a tip from greg at RTBB that Big Daddy keeps a rebuild kit for this. But really wanted to do this on the weekend so took a list of the parts and proceeded to local Jaycar store with shopping list in hand.
List calls for the following.
4 x IN 4004 diode
3 x 35a Bridge rectifier
heat sink for above
1 x 60v MOV
1 x 25ohm resistor
1 x 600 ohm resistor
1 x 100k ohm resistor
10 x fuse clips
20 pin molex connector.

Got some of these parts at Jaycar but not all, and some parts weren't the same as on my list so could you please advise if these are suitable.
They didn't have 60v MOV
they supplied me with 1% .5 watt resistors, a 5 watt W/W 680 resistor, didn't have 100k ohm resistor, only had cheapish fuse clips, didn't have molex connectors.

Cheers

Ric