Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
The forum software has been updated!
Home
Help
Login
Register
The Aussie Pinball Arcade
»
Aussie Pinball Forums
»
Restorations
»
1980 Bally Space Invaders Cleanup
»
Message #90564
« previous
next »
Print
Pages: [
1
]
2
3
...
10
Go Down
Author
Topic: 1980 Bally Space Invaders Cleanup (Read 7350 times)
0 Members and 5 Guests are viewing this topic.
Jango
Trade Count:
(
0
)
Forum Posts:
Re: 1980 Bally Space Invaders Cleanup
«
on:
July 08, 2011, 01:23:24 AM »
After cleaning and reinstalling the legs (this time I added caster wheels temporarily to assist with moving the cabinet around my garage), the first step was to remove the playfield and headbox from the cabinet. I then completely gutted the interior of the cabinet in preparation for cleaning it and spraying. Vacuuming the interior of the cabinet followed by some Nifty did wonders initially.
I then used the White Knight Light Grey Super Primer and then followed it with White Knight Dusk Grey which was a very good match to the grey in the exterior of the cabinet. These were purchased from Bunnings. I decided to spray the entire interior of the cabinet. It looks sensational in real life
Just as Nino did, I had to reinforce the neck that holds the headbox in place. I did exactly what Nino did and used some 75mm wood screws to secure this nicely to the cabinet. I later used some gloss black paint to give the neck a much better finish than was there previously. In later pics it looks a little too glossy so for the headbox I think I'll use semi gloss though
«
Last Edit: July 08, 2011, 12:24:45 PM by Jango
»
Logged
Print
Pages: [
1
]
2
3
...
10
Go Up
« previous
next »
The Aussie Pinball Arcade
»
Aussie Pinball Forums
»
Restorations
»
1980 Bally Space Invaders Cleanup
»
Message #90564