Side Rail installationNow that we have installed the correct adhesive strip, the siderails can be installed. This is a really easy process. First of all, don't remove the backing on the siderails, as you will have to make a "practice run". All you need to do is install the siderail against the cabinet and align the front ground bolt. This should fit easily. Now that you have the siderail in position, check that it covers the plastic glass channel and you are almost ready ! Use three or four pieces of low tack masking tape (painter's tape) hold the siderail in position.
Next, remove the ground bolt and you can swing the siderail down to expose the backing tape. The alignment is set, so it is really easy to take the next step ;
Now remove the backing off the adhesive strip, any fold the sidrail back into position, ensuring the top of the siderail sits prefectly on top of the plastic glass channel
Now repeat for the other side !
