Message #92975

[Strangeways]

As with all metal playfield parts, they are initially washed and cleaned before being placed in the tumbler with Flitz. I tumble the parts for no longer than 4 hours - Flitz gives the best results in half the time of other products.








Playfield Re assembly

Most of the underside mechanisms can be refitted. I have one assembly that needs to be re welded - more on that later. For now, the process is simply to rebuild all the mechanisms, cleaning and re polishing them. Inserts and cleaned with windex. All the coil sleeves are replaced. Wiring is tidied up and LEDs are installed !








While fitting the underside, new parts are installed topside. This includes pop bumper parts, posts, targets and some plastic parts. New flipper bats are installed at the time I fit the flipper rebuild kit.








Adding more and more parts !














Moving along nicely !