I have been doing little pieces here and there

I have removed the targets from the lower playfield
Cleaned the targets and tumbled the metal parts

Tumbled pop bumper parts (3 more to go)





I had being trying to remove the upper playfield, but to do this I need to first remove the flippers
As you can see from the picture, the assembly for the upper flippers, drop targets, ramp lift and a pop bumper are really close together
Being unfamiliar with Zaccaria’s I am wanting to do one assembly at a time, but that does not seem possible
So to remove the flipper, the ramp lift had to be removed first.

Then I get out the Allen keys to unscrew the grub nuts
Of course, one is missing, so I have to buy a new set
These do not fit either
Italian machine needs metric Allen keys

So, after mucking around all week, the upper playfield is off