Still plugging away and after many trials i have had some success repairing the yellow paint. As the photos showed these were small holes about 1ml round and 1 ml deep every time i wiped the paint over it would drag out of the hole, so i ended up putting the paint in a medical syringe with needle and forcing paint into hole leaving a small pimple of paint, leave this overnight to dry and then i used a damp rag held tight over a stiff block and rubbed down the high points. There were hundreds of these but the process didnt really take that long. Over the next few days i will sand and polish the rollovers, i will try and keep as many as original as i can but some are so cupped they will need replacement transfers, should i cut these transfers to the exact size of the rollover then set the lamp cover and transfer flush or should i leave the black collar on the transfer and stick them to the flush lamp cover leaving the black overlap but will be raised the thickness of the transfer ( i hope that made some sense).
I have some novus products 1, 2, 3 and want to use 2 to clean the pf further my question is can i wax the play field after using novus 2 or should i clean it down again with white spirit before waxing.
Sorry about the newby questions.
I have been in contact with Beaky and will be taking him my boards and display (might give him a call and see if i can take them this weekend if possible). Its all getting exciting but im already thinking about what next....
Thanks Mark
