I was unhappy with the quality of the lamp transfers so i decided to try and save as many original as possible with as little sanding as possible then polishing with novus three. Unfortunately there were a few that were so cupped that i had to use the transfer the photo shows the top 3 with transfers and (yes the B did cause trouble).  I trimmed the transfers to fit then set them flush to the pf nice and smooth, i will now touch up the black ring. I used the match technique but used blue tac instead of silicone. I was surprised how long it took to get these cleaned, flat and polished. Cheers Mark.
PS enjoying everyone else's threads.