Thanks Ken. I have noticed that when one switch is stuck on a few others go out with it. I will go over the machine again and check all of the switches. I found one tonight that looked fine but the thicker arm that sits much lower than the contact leaf was actually constantly touching and killing a heap of switches. I adjusted that and they came good. Cross fingers it is something similar with the other rollovers that aren't working.
The machine is by no means mint but it has come up pretty nice considering it sat for at least 8 years with no glass on it collecting dirt and dust. I put a few coats of carnuba wax on it tonight which deepened the colours on the playfield a bit. I will put some more coats on tomorrow.
Received my order from RTBB today installed the remaining lane guides and siamese posts. The new parts on the playfield add a bit of bling and take your attention off the imperfections on the playfield here and there. I will add a few more pics later on.
