Author Topic: World Cup Soccer 94 Restoration  (Read 6127 times)

0 Members and 5 Guests are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: World Cup Soccer 94 Restoration
« Reply #30 on: November 18, 2011, 09:57:38 AM »
How has your luck been with the repro plastics? Mine are from the 'first' CPR run, and I've been told they are made out of a different material than they were originally, and they may be brittle?

My WCS is still in the project queue, is made up from parts from 2 different WCS machines! Can't wait to get to it!


I thought they settled on PETG 2-3 years ago ?

Mine are stunning - except I had to elongate some holes on the large left hand side plastic that starts at the ramp and finishes behind the Goalie. There was at least three holes I had to elongate. They were not even close to the original. Took me 5 minutes.

I was able to install the new rivets without any dramas. I assumed it was PETG so I used a lot of force. If they were acrylic, they might have fractured.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia