Wanted Bally Ball Shooter Guide

[Crashramp]

Does anyone know where I can buy a Bally Ball Shooter Guide part number C-934? This is the white plastic sleeve which is located directly under the chrome shooter cover on early 80's (most probably other eras too?) Bally games.

[pinball god]

Is yours broken? I just cleaned mine up seeing it can't be seen, but I did wonder what if I needed one. Have you asked pbr?

[pinball god]

Found one but is OS

http://www.pinballcenter.eu/catalog/abschussgehaeuse-c934-p-1841.html?language=en

[Pintoxicated]

Are you after a new one a just anything to replace a damaged one?

[ddstoys]

I'm sure I have a spare second hand one if needed

[wiredoug]

i got mine from best of pinball
http://www.bestofpinball.de/catalog/product_info.php/products_id/13196

[Crashramp]

Thanks for the replys guys. I'm after a new one. Mine isn't broken just very yellow and getting brittle so I thought I'd just replace it while I'm going with the restore.

[wiredoug]

im replacing 6 crash .. you can have the best of the ones i take out if it helps.   mind you they might all be as bad as yours .. happy to check and get back to you if you dont get a better offer

[Crashramp]

im replacing 6 crash .. you can have the best of the ones i take out if it helps.   mind you they might all be as bad as yours .. happy to check and get back to you if you dont get a better offer

Thanks very much for the offer    but I'm happy to buy some new ones now that I know they're still available.

[ralph67]

PBR does  sell the gottlieb one's and they will fit after modifying the outside and you would have to file out the hole centres as they are about  3mm to narrow compared to the Bally type,  I have not tried this but i think it would work, only if you can't get a new one. Another suggestion,1 get a new plain shooter sleeve , 2 drill out existing nylon housing to suit the new sleeve 3 insert into hole, A friend did this on his Bally 'Strikes And Spare" and it worked a treat

[Crashramp]

PBR does  sell the gottlieb one's and they will fit after modifying the outside and you would have to file out the hole centres as they are about  3mm to narrow compared to the Bally type,  I have not tried this but i think it would work, only if you can't get a new one. Another suggestion,1 get a new plain shooter sleeve , 2 drill out existing nylon housing to suit the new sleeve 3 insert into hole, A friend did this on his Bally 'Strikes And Spare" and it worked a treat

Thanks for the ideas.  I've ordered from Best of Pinball and they're on there way so I'm all sorted now.